Dynojet Power Commanders

Power On Command!!
Introducing the new Power Commander the perfect tuning tool for your Fuel Injected Motorcycle.
Dynojet's new Power Commander series represents breakthrough technology for motorcycles with original equipment (OEM) fuel injection. Each unit is supplied with a specific map, designed to improve performance over stock. In addition, several maps for alternate tuning packages are included on disk and can be downloaded into the Power Commander module via a PC computer. The Power Commander includes a PC link cable and software package which allows you to fully map the fuel and ignition curves on your PC computer. If no PC computer is available, the fuel curve can be adjusted using three touch buttons on the face plate.

Dynojet Power Commander Provides:

Racetrack proven technology.
Built in microprocessor.
Lightweight, compact and sealed for durability and reliability.
Fuel curve adjustment with LED display on face plate for fine tuning.
Software and PC link included which allows 3D adjustment of the fuel curve and ignition curve (on selected models)
Simple, 5-minute installation.
No wiring modifications required. OEM style connectors supplied.
No permanent changes made to your stock ECU.
Fully adjustable via buttons or PC computer with the Dynojet Control Center Software (included).
Maximum results in the minimum time provide: Crisper Throttle Response, Increased Horsepower & Optimal Fuel Consumption.


There are 4 different specifications of Power Commander - they are as follows:

PCII = Sensor Offset Technology (multiple fuel maps for multiple sensors, + Ignition Map). The Power Commander II plugs in between the bike's sensors and the ECU. PCII connects to computer via a serial port.

PCIII = Direct Injector Control (ONE fuel map, no ignition). The Power Commander III plugs in line between the ECU and the injectors. PCIII connects to computer via a serial port.

PCIIIR = As PCIII, but with additional wiring loom & connectors for adjustment of ignition timing. The Power Commander IIIR plugs in between the ECU and the injectors. PCIIIR connects to computer via a serial port.

PCIIIUSB = Similar to PCIII, there is fuel adjustment only on PCIIIUSB model, separate ignition modules are available for some of the PCIIIUSB models. The USB Power Commander features fuel adjustment at 250rpm increments, rather than every 500rpm on the older style PCIII's - and therefore allow for very fine tuning. PCIIIUSB connects to computer via a USB port.